IMX094 vs. KAI-11002
Compared to old fill frame CCD sensors such as the KAI-11002, the IMX094 has higher resolution, higher QE with lower read noise and faster FPS.
Unique Tilt Adapter
ASI094 Pro includes unique tilt adapter. Say goodbye to tilt problems forever !
USB 3.0 Port & USB2.0 HUB
USB 3.0 Port: can provide 5Gb bandwidth to let ASI094 Pro run at 5 fps at full resolution(36Mega).
ASI094 Pro camera has one full frame sensor, so the power consumption (650mA@5V) is much higher than other cameras. But USB3.0 can provide 1000mA current, so ASI094 Pro can run standalone under USB3.0 host, it doesn’t need external power supply.
You need to connect the external 12v power supply if you connect the camera to USB 2.0 host which can only provide 500ma current.
Recommended cooler power supply: 12V @ 3-5A (or more) DC adapter (2.1×5.5mm, center pole positive). Also suitable: DC battery with 9-15V.
USB 2.0 HUB: can connect with various accessories, such as filter wheel, guide camera and electronic focuser, so you can manage your cable better with USB2.0 hub. There are 2 short 0.5m USB2.0 cable come with ASI094 Pro. the power of hub source from external power supply if you connect it.
Cooling and Anti-Dew Heater
ASI094 Pro has a two-stage TEC cooling system that allows deep cooling (30°C-35°C below ambient). You will need an external power supply to power the cooler. An AC-DC power adapter is not included in this package, however you can order one from here.
The anti-dew heater will heat the AR protect window to avoid any dew problems. The heat anti-dew heater power is around 3.6W and can be turn off in software to save power.
- M48-M48 16.5MM extender
- M54-M48 21MM extender
- Reducer or Flat lens
What is in the box?
ASI094 Pro box includes all necessary cables, adapters, and manuals.