Altair 60mm Guide Scope with a 1.25" non-rotating Micro focuser, OTA, rings, stalk, and UNIFBR base.
Focal length is 225mm (F3.75) which is perfect for autoguiding.
The focuser has a 1.25" ID push-fit adapter with brass compression ring, allowing use of auto-guiding cameras or 1.25" eyepieces.
The indexed micro-focuser can be locked, enabling the eyepiece or camera to set at the correct focus-point.
Because the focuser does not rotate, the guide camera is easier to focus and maintain alignment on-target.
The rear of the focuser also includes a T2 thread to allow the addition of extensions.
The finder stalk is compatible with most finder scope brackets on the market, but also includes a universal finder bracket also sold separately (product code UNIFBR), with a cross-slotted hole pattern to fit most telescopes.
Tip: To attach the finder scope to Vixen dovetail bars, simply remove the stalk by means of the two M5 set screws and attach it to your dovetail bar by means of the two holes in the crosspiece between the rings.
Included in the box:
60mm finder scope optical tube with dewshield and rubber end cap.
Metal Rings with Nylon Tipped Thumbscrews
Metal Finder Stalk (fiits Skywatcher, Altair and most finder brackets)
Universal Finder Bracket (two thumbscrews)
1.25" Non-Rotating Helical Focuser (focusing scale, locking thumbscrew & brass compression ring, end cap)