Only 3.4kg
Although the
capacity is 13.5kg (maximum 18kg), the weight of the mount is only 3.4kg. It
fits in one hand, so you don’t need a separate large bag for this. The lighter
the mount, the greater the frequency of use.
±2.5arcsec PE
A high-resolution
encoder from Renishaw is built into the RA axis. As a result, a periodic error
of only ±2.5 seconds was achieved. Choose the RST-135E mount if you are
bothered or reluctant to use the autoguide system.
Counterweights Not Required
Counterweights not
required up to 13.5kg. It is especially convenient for domestic mobile
observation as well as overseas expedition observation.
Freed from balancing
The performance of
the worm gear mount is sensitive to the balance, but the RST-135E is not. No
need to rebalance even if you change the eyepiece or camera.
Strain Wave Gear(Harmonic Drive)
Instead of worm
gears, a new type of reducer called strain wave gear (harmonic drive) is used.
Almost no backlash and no maintenance is required. As it is widely used in
industrial robots, it is very durable.
CNC Machining
CNC machined
aluminum alloy AL6061 is used for aircraft. That’s why it’s small, light and
stiff. The beauty of the machined surface increases the collection value.
WiFi
WiFi is built in. You can control the mount via the SkySafari app on
your smartphone. Ascom Driver can be connected via WiFi as well as USB. GOTO
and AutoGuide are now wireless.
GPS Receiver
GPS receiver is built in. The position and time of the observer can be
entered accurately and conveniently.
Home Sensor
There is a built-in home sensor to find the mechanical origin. This is
useful for permanently using Star Alignment data. Build an ultra-small remote
observatory with the RST-135E mount.
In the box
Hand controller (Hubo-i SE)
Cable for hand controller
Power cable (5.5×2.1mm DC)
Adapter for camera tripod(3/8? thread)
